PTZ Tracking Box
Convert your existing or new PTZ into an autotracker by using the ISTRK. Loop your video and data through the tracker box then put your PTZ in autotrack mode, or control the PTZ directly with your DVR or Joystick (as you do now). Autotracking mode is enabled by using preset 51. The ISTRK will automatically pan, tilt, and zoom to track the moving object. The On-Screen Display (OSD) allows you set up stops to control the perimeter of the area that you want to monitor. You can also set up how closely you want the tracker to zoom-in on tracked objects (similar to how you tune for motion detection). The ISTRK has 4 relay inputs. You can put a motion detector on a relay to trigger the PTZ to move to a preset location and start autotracking. After movement ceases or moves out of the monitored area the autotracker will return the PTZ to its preset home position.
Note: Only use one ISTRK per camera.
Note: The ISTRK is NOT weatherproof.
Specifications
Interface: RS-485 (one to controller, the other to PTZ camera)
Baud Rate: 2400bps, 4800bps, 9600bps
Menu: OSD
Spectra Address 0~255
Protocols: Pelco D, Pelco P
Power: 9~12V DC
|
SECURITY CAMERAS & Surveillance Systems 
